Publications 2015
printPublications involving two or more COST Action countries:
|
No |
Authors |
Title |
Journal |
Ackn |
|
1 |
M. Broda (PL), B. Mazela (PL), K. Krolikowska-Pataraja (PL), C.A.S. Hill (NO) |
The use of FT-IR and computed tomography non-destructive technique for waterlogged wood characterisation |
Wood Res. 60 (5) (2015) 707-722 |
no |
|
2 |
J. Ruponen (FI), P. Čermák (FI, CZ), M. Rhême (CH), L. Rautkari (FI) |
Reducing the moisture sensitivity of linear friction-welded birch (Betula pendula L.) wood through thermal modification |
J. Adhes. Sci. Technol. 29(22) (2015) 2461-2474 DOI: 10.1080/01694243.2015.1069721 |
no |
|
3 |
J. Hu (PRC, FR), S. Chang (PRC), K. Peng (PRC), K. Hu (PRC), M.-F. Thevenon (FR) |
Bio-susceptibility of shells of Camellia oleifera Abel. fruits to fungi and termites |
Int. Biodet. Biodeg. 104 (2015) 219-223 DOI: 10.1016/j.ibiod.2015.06.011 |
no |
|
4 |
C. Ganne-Chédeville (CH), S. Diederichs (DE) |
Potential Environmental Benefits of Ultralight Particleboards with Biobased Foam Cores |
Int. J. Polym. Sci., 2015, Article ID 383279, 14 p DOI: 10.1155/2015/383279 |
yes |
|
5 |
A. Bastani (DE), S. Adamopoulos (SE), H. Militz (DE) |
Gross adhesive penetration in furfurylated, N-methylol melamine modified and heat-treated wood examined by fluorescence microscopy |
Eur. J. Wood Prod., 73 (2015) 635–642 DOI: 10.1007/s00107-015-0920-2 |
no |
|
6 |
A. Bastani (DE), S. Adamopoulos (SE), H. Militz (DE) |
Water uptake and wetting behaviour of furfurylated, N-methylol melamine modified and heat-treated wood |
Eur. J. Wood Prod., 73 (2015) 627–634 DOI: 10.1007/s00107-015-0919-8 |
no |
|
7 |
M.D. Burnard (SI), A.Q. Nyrud (NO), K. Bysheim (NO), A. Kutnar (SI), K. Vahtikari (FI), M. Hughes (FI) |
Building material naturalness: Perceptions from Finland, Norway and Slovenia |
Indoor Built Environ. 26(1) (2015) 92-107 DOI: 10.1177/1420326X15605162 |
yes |
|
8 |
P. Čermák (CZ), L. Rautkari (FI), P. Horáček (CZ), B. Saake (DE), P. Rademacher (CZ), P. Sablík (CZ) |
Analysis of dimensional stability of thermally modified wood affected by re-wetting cycles |
BioRes., 10(2) (2015) 3242-3253 DOI: 10.15376/biores.10.2.3242-3253 |
yes |
|
9 |
J. Ruponen (FI), P. Čermák (CZ), M. Rhême (CH), A. Miettinen (FI), A. Rohumaa (FI), L.Rautkari (FI) |
Influence of welding time on tensile-shear strength of linear friction welded birch (Betula pendula L.) wood |
BioRes. 10(2) (2015) 3481-3491 DOI: 10.15376/biores.10.2.3481-3491 |
no |
|
10 |
M. Riggio (IT), J. Sandak (IT), S. Franke (CH) |
Application of imaging techniques for detection of defects, damage and decay in timber structures on-site |
Constr. Build. Mater. 101 (2015) 1241–1252 DOI: 10.1016/j.conbuildmat.2015.06.065 |
no |
|
11 |
A. Kutnar (SI), D. Sandberg (SE) |
Next steps in developing thermally modified timber to meet requirements of European low carbon economy |
Int. Wood Prod. J. 6(1) (2015) 8-13 DOI: 10.1179/2042645314Y.0000000079 |
yes |
|
12 |
Willems, W. (NL, DE), M. Altgen (DE), H. Militz (DE) |
Comparison of EMC and durability of heat treated wood from high versus low water vapour pressure reactor systems |
Int. Wood Prod. J. 6(1) (2015) 21-26 DOI: 10.1179/2042645314Y.0000000083 |
yes |
|
13 |
R. Ringman (SE), A. Pilgard(SE, DE), K. Richter (DE) |
In vitro oxidative and enzymatic degradation of modified wood |
Int. Wood Prod. J. 6(1) (2015) 36-39 DOI: 10.1179/2042645314Y.0000000080 |
yes |
Papers from one COST Action country:
|
No |
Authors |
Title |
Journal |
|
1 |
E. Correal-Mòdol (ES), M. Vilches-Casals (ES) |
Characterization of cross-laminated timber panels of Pinus sylvestris from Catalonia (Conference Paper) |
26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector – Proceedings 2015, 61-65 ISBN: 978-953292040-6 |
|
2 |
C. Brischke (DE), L. Meyer-Veltrup (DE) |
Moisture content and decay of differently sized wooden components during 5 years of outdoor exposure |
Eur. J. Wood Wood Prod., 73(6) (2015) 719-728 DOI: 10.1007/s00107-015-0960-7 |
|
3 |
L. Meyer (DE), C. Brischke (DE) |
Fungal decay at different moisture levels of selected European-grown wood species |
Int. Biodet. Biodeg., 103 (2015) 23-29 DOI: 10.1016/j.ibiod.2015.04.009 |
|
4 |
M. Moro (HR), K. Segotic (HR), K. Liker (HR), A. Pirc Barčić (HR), D. Motik (HR) |
Analysis of industrial round wood production in Croatia and surrounding countries |
26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector – Proceedings 2015, 173-178 |
|
5 |
A. Pirc Barčić (HR), B. Liker (HR), D. Motik (HR), M. Moro (HR) |
Financial analysis of croatian furniture industry |
26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector – Proceedings 2015, 187-191 |
|
6 |
M.D. Burnard (SI), A. Kutnar (SI) |
Wood and human stress in the built indoor environment: a review |
Wood Sci. Technol., 49 (2015) 969–986 DOI 10.1007/s00226-015-0747-3 |
|
7 |
M. Trcala (CZ), P. Čermák (CZ) |
Numerical analysis of temperature profiles during thermal modification of wood: Chemical reactions and experimental verification |
Holzforschung, 69(3) (2015) 321-328 DOI: 10.1515/hf-2014-0118 |
|
8 |
S. Källbom (SE), M. Wålinder (SE), K. Segerholm (SE), D. Jones (SE) |
Surface energy characterization of thermally modified spruce using inverse gas chromatography under cyclic humidity conditions |
Wood Fiber Sci., 47(4) (2015) 410-420
|
|
9 |
I. Santoni (IT), E. Callone (IT), A. Sandak (IT), J. Sandak (IT), S. Dirè (IT) |
Solid state NMR and IR characterization of wood polymer structure in relation to tree provenance |
Carbohyd. Polym., 117 (2015) 710-721 DOI: 10.1016/j.carbpol.2014.10.057 |
|
10 |
J. Sandak (IT), A. Sandak (IT), M. Riggio (IT) |
Characterization and monitoring of surface weathering on exposed timber structures with a multi-sensor approach |
Int. J. Arch. Herit., 9 (2015) 674–688 DOI: 10.1080/15583058.2015.1041190 |
|
11 |
J. Sandak (IT), A. Sandak (IT), M. Riggio (IT) |
Multivariate analysis of multi-sensor data for assessment of timber structures: Principles and applications |
Constr. Build. Mater., 101 (2015) 1172-1180 DOI: 10.1016/j.conbuildmat.2015.06.062 |
|
12 |
A. Sandak (IT), J. Sandak (IT), M. Riggio (IT) |
Estimation of physical and mechanical properties of timber members in service by means of infrared spectroscopy |
Constr. Build. Mater., 101 (2015) 1197-1205 DOI: 10.1016/j.conbuildmat.2015.06.063 |
|
13 |
J. Sandak (IT), A. Sandak (IT), C. Cantini (IT), A. Autino (IT) |
Differences in wood properties of Picea abies L. Karst. in relation to site of provenance and population genetics |
Holzforschung, 69(4) (2015) 385-397 DOI: 10.1515/hf-2014-0061 |
|
14 |
G. Mantanis (EL), C. Lykidis (EL) |
Evaluation of weathering of furfurylated wood decks after a 3-year outdoor exposure in Greece |
Drvna Industrija, 66(2) (2015) 115-122 DOI: 10.5552/drind.2015.1425 |
|
15 |
A. Sandak (IT), J. Sandak (IT), O. Allegretti (IT) |
Quality control of vacuum thermally modified wood with near infrared spectroscopy |
Vacuum, 114 (2015) 44-48 DOI: 10.1016/j.vacuum.2014.12.027 |
|
16 |
E. Correal-Mòdol (ES), M. Vilches-Casals (ES) |
Characterization of cross-laminated timber panels of Pinus sylvestris from Catalonia (Conference Paper) |
26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector – Proceedings 2015, 61-65 ISBN: 978-953292040-6 |